Trade Kitchen Worktops

Trade products

Laminate worktops from Kronodesign and Duropal, in postformed and square-edged profiles, with matching upstands and splashbacks. On project work laminate is usually the right answer: hard-wearing, quick to fit, and replaceable a length at a time rather than a room at a time.

The ranges

Kronodesign worktops

A broad décor range covering stone effects, woodgrains and plain colours — the range most often specified on Brooklands project work.

Browse Kronodesign →

Duropal worktops

A well-established laminate range with stone, marble and timber effect décors.

Browse Duropal →

Postformed worktops

A rolled front edge — the standard profile for most kitchens, and the most forgiving to fit.

Browse postformed →

Square-edged worktops

A crisp square profile for a more contemporary look, often paired with handleless doors.

Browse square-edged →

Upstands

Matching upstands to close the gap between worktop and wall without tiling.

Browse upstands →

Splashbacks

Matching splashbacks behind hobs and sinks, in the same décor as the worktop.

Browse splashbacks →

Choosing a worktop for a project

If the project is… Consider Why
A rental property Postformed laminate, mid-tone stone or woodgrain décor Scratch and moisture resistant, hides day-to-day wear, cheap to replace as a single length
A resale refurbishment Square-edged laminate in a stronger décor Reads as a more expensive surface in photographs and at viewings
A multi-plot development One décor and profile across the scheme Simplifies ordering, cutting and replacement; reduces the chance of the wrong length reaching the wrong plot
A tiered development Same profile, different décor per tier Keeps fitting consistent while visibly differentiating the premium units

Whichever way you go, keep the upstands and splashbacks in the same décor and order them at the same time — they are the items most often forgotten and the ones most likely to hold up a completion.

Sizes and profiles

Worktops are supplied as pre-finished laminate lengths. Available lengths, depths and thicknesses vary by décor and profile, and the exact dimensions of every board are listed on its own product page — including which lengths are stocked in each décor. If you are pricing a run, tell us the wall lengths and we will tell you how many boards it actually takes rather than leaving you to work it out from a size chart.

Important — what is not included: worktops are supplied as lengths. Cutting to size, mitred or masonry joints, sink and hob cut-outs, edging application, templating and installation are not included and are carried out on site by your fitter.

Ordering worktops by quantity

  • Send the runs, not just the total. Three separate 2.4m runs is not the same order as one 7.2m run.
  • Say which décor and profile. The same décor is often available in both postformed and square-edged.
  • Include upstands and splashbacks. Match them to the worktop décor and order together.
  • Allow for waste. Cut-outs and joints mean the boards you need rarely equal the metres you measured.
  • Order the whole project at once where you can. Décor availability is confirmed at the point of order, not held indefinitely.
  • Ask about delivery. Worktops are long and heavy — larger loads go on a dedicated service.

Worktop delivery

Worktops are delivered across mainland UK on a fully tracked service, with larger worktop loads on a dedicated service and the delivery day arranged with you. Worktop delivery is charged separately from standard parcel delivery; the current rate and any promotional delivery offers are shown on our delivery information page. The Scottish Highlands & Islands, Northern Ireland, offshore and certain remote postcodes may be excluded or surcharged — we always confirm before an order is processed.

Check every worktop on arrival before signing. Long laminate boards are the item most likely to be damaged in transit, and damage or shortages should be reported within 48 hours so they can be put right quickly.

How to get a worktop project quoted

  1. Send the run lengthsWall by wall, with the depth you need and any returns.
  2. Choose décor and profileOr ask us to suggest options that suit the specification and the budget.
  3. We work out the boardsHow many lengths, plus upstands and splashbacks to match.
  4. You get an itemised priceIncluding delivery, so there is nothing to add later.

Send us your worktop schedule

Upload a schedule, a drawing or a list of run lengths and we will work out the boards and price them. We aim to reply within one working day.

Trade worktop FAQs

Do you cut worktops to size?
No. Worktops are supplied as pre-finished lengths. Cutting, jointing, cut-outs, edging and installation are carried out on site by your fitter.
What is the difference between postformed and square-edged?
Postformed has a rolled front edge, which is the traditional profile and the more forgiving to fit and to seal. Square-edged has a crisp 90-degree front edge for a more contemporary look, and pairs particularly well with slab and handleless doors.
Can I get upstands and splashbacks to match?
Yes. Matching upstands and splashbacks are available in the same décors. Order them at the same time as the worktop so the batch matches.
What sizes do worktops come in?
Available lengths, depths and thicknesses vary by décor and profile, and the exact dimensions are listed on each product page. Send us your run lengths and we will tell you how many boards the job needs.
How much is worktop delivery?
Worktop delivery is charged separately from standard parcel delivery. The current rate and any promotional offers are shown on our delivery information page, and delivery is confirmed on your quotation before the order is processed.